Benefits of the EZ-CLONE Cloning system
* Accommodate up to 120 cuttings simultaneously
* Provided neoprene collars hold cuttings and remove need for other
mediums.
* Custom designed ABS plastic enclosure provides high capacity in
space conscious form -
factor
* Patent Pending aeroponic system does all the work under the
hood.
* See roots in as little as 5 days.
* 100% success rate, Money back guarantee
* Highly knowledgeable technical support staff available to assist
your needs. |
Follow instructions below for E Z Clone.
Flurescent Light (preferably T5) must be 8 - 10 inches above
clones, maintain about a 75 F Air temp and the water should be
around 72 - 75 F. Maintain PH at 6.3 and Mist your clones
2-3 times a day. Use mild nutrients in system.
1. Dip cuttings ( Olivia's or other rooting
gel) and insert cutting 1-1/2 inches passed neoprene collar.
Do quickly so you do not stress clone.
2. Place collar with clone in it into EZ Clone System and put
under 24 hours of light
Rockwool Cloning Guide
|
1. In a 5
gallon bucket, fill with 3 gallons of water
2. Add 13 drops of Superthrive per gallon (39 drops total)
3. Adjust PH level of water to 5.0
4. Add rockwool cubes to water and soak for 24 hours
5. Next day pull cubes out of water and extract 80% of the
water from the cube
6. Put some of your cloning gel/powder into a clean small
cup
7. Take some of the water you soaked the cubes in and put into
a clean bowl
8. Cut clones and place cut end in the bowl of water for 20
minutes
9. Dip cuttings in gel/powder and insert cutting into cube
10. If hole provided in cube is not the right size, then make a new
hole
11. Place cube with clone in it into prop flat (30-35 per flat),
place humidity dome on flat and put under 24 hours of light
12. Clean domes of moisture at least twice per day
13. In 4-5 days or when very dry, add small amount of water to each
cube (dip cube in bowl of water about ½ way up)
If Superthrive is not available, Use another B1 product. (B52 /
Vitamax / Thrive Alive)
|
